This post continues from the previous Sculpting a 15mm Building Tutorial post.
Almost the end of January 2013! This year I resolved to knock some of the multitude of incomplete projects lurking in my garage on the head. This particular building facade was started as a tutorial back in late 2011. I made the mold and several casts back then but haven’t got around to doing anything with them until recently.
In the last post, you saw the completed master made from a plaster body with resin parts attached. Here’s the ‘Ultrasil’ RTV mold made from that master, using the one sided molding technique I’ve discussed here before.
Once I’ve got a mold created and tidied up, the rest is really downhill. Large one sided molds like this are easy to cast with ‘Ultracal 30′, a hard casting plaster which will pick up the flat surface details nicely, with no shrinkage. I cast these molds using the ‘wet water’ technique and covered with a sheet of glass from cheap photo frames to ensure the back side of the cast is flat.
Here’s a cast of the mold standing next to my earlier, larger 15mm Facade which now looks a little over scale for a 15mm building. The older building is three stories, but I can’t see myself putting more than a couple of buildings this tall on a wargaming table as they’d probably be a liability while you’re gaming around them. The newer facade is a much more reasonable size for a Flames of War table.
I’ve based and painted a damaged cast of the new facade, which I’ll show in the final post of this tutorial.