Kim from Kreative Scenery has just released a laser cut 28mm scale Gothic Office Building. He was kind enough to give me a discounted copy to review here.
The kit comes as a series of pre-cut 3mm MDF pieces, and a set of 3D-printed parts for the window and door detailing. This first photo shows my assembled kit and the gray parts were 3D printed. They sit very nicely into the laser cut MDF framing, and Kim sensibly recommends you paint them separately before gluing them into place.
The parts are fully cut, which means the larger pieces are shipped loose in a box, and the smaller pieces included in a set of envelopes. This reduces the shipping weight for international buyers and means you can build straight out of the box using the emailed instructions. You can see the pieces I’ve scattered across my building table in this photo. The parts were assembled with PVA, with any excess being removed with a damp brush. That’s why some of the MDF looks a little pre-stained in these photos.
The build instructions are easy to follow, the pieces go together well and the resulting building is strong and light. It’s built in three sections: a ground floor, a lift-off middle floor, and roof. Each section is also built in two stages, the basic structure and then a layer of exterior detailing. This photo shows the basic structure prior to adding the roof and external detailing. There’s plenty of space inside too which means you could go to town with interior detailing if you’re playing skirmish games using the building.
Overall the finished building looks good. It definitely has the High Gothic Warhammer 40k feel but at the same time is restrained enough to fit onto pretty much any sci-fi table as an Administrative, Office or Apartment building. I could also see it sneaking onto a modern or WWII table with a few additional period buildings around it. The combination of the basic MDF structure, the external MDF detailing and the finer 3D printed window frames combine very nicely in the finished builing.
The front and back of the building are detailed differently as well which is a nice touch. It gives you two options to use depending on how you position the building on your table and also means you can place two of the same building next to each other with different facades. The front shown above has a nicely recessed doorway, with a set of smaller overhead windows, while the rear has a more industrial feel with a roller door and smaller side window.
Overall a very nice kit, that builds into a strong building that will look great on your table once painted.